Cảm biến tiệm cận Omron E2A-M08KN04-M1-B2

Thông số kỹ thuật cảm biến tiệm cận Omron E2A-M08KN04-M1-B2

• Sensing distance: 2 mm ± 10%
• Setting distance: 0 to 1.6 mm
• Differential travel: 10% max. of sensing distance
• Target: Ferrous metal (The sensing distance decreases with non-ferrous metal.)
• Standard target (mild steel ST37): 8×8×1 mm
• Response frequency *1: 1,500 Hz
• Power supply voltage (operating voltage range): 12 to 24 VDC. Ripple (p-p): 10% max. (10 to 32 VDC)
• Current consumption (DC 3-wire): 10 mA max.
• Output type: -B models: PNP open collector
  -C models: NPN open collector
• Control output Load current *2: 200 mA max. (32 VDC max.)
• Control output Residual voltage: 2 V max. (under load current of 200 mA with cable length of 2 m)
• Indicator: Operation indicator (Yellow LED)
• Operation mode (with sensing object approaching): -B1/-C1 models: NO
  -B2/-C2 models: NC
  For details, refer to Data Sheet.
• Protection circuit: Power source circuit reverse polarity protection, Surge suppressor, Short-circuit protection
• Ambient air temperature: Operating: -40°C to 70°C, Storage: -40°C to 85°C (with no icing or condensation)
• Temperature influence *2: ±10% max. of sensing distance at 23°C within temperature range of -25°C to 70°C
  ±15% max. of sensing distance at 23°C within temperature range of -40°C to 70°C
• Ambient humidity: Operating: 35% to 95%, Storage: 35% to 95%
• Voltage influence: ±1% max. of sensing distance in rated voltage range ±15%
• Insulation resistance: 50 MΩ min. (at 500 VDC) between current carry parts and case
• Dielectric strength: 1,000 VAC at 50/60 Hz for 1 min between current carry parts and case
• Vibration resistance: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y and Z directions
• Shock resistance: 500 m/s2, 10 times each in X, Y and Z directions
• Standard and listings *3: IEC60529: IP67, Degree of protection EN60947-5-2: EMC
• Connection method: -WP models: Pre-wired models (Standard length: 2 m)
  -M1 models: M12 4-pin connector models
  -M5 models: M8 3-pin connector models
• Weight (packa- ged) Pre-wired: Approx. 65 g
• Material Case: Stainless steel or brass-nickel plated
• Material Sensing surface: PBT
• Material Cable: PVC
• Material Clamping nut: Brass-nickel plated

Tình trạng sản xuất: Thay thế bằng E2E-X4MB28-M1