Bộ mã hóa vòng quay Omron E6A2-CS3C 300P/R 0.5M

Thông số kỹ thuật Encoder Omron E6A2-CS3C 300P/R 0.5M

• Power supply voltage: 5 VDC -5% to 12 V +10%,
  ripple (p-p): 5% max.
• Current consumption *1: 20 mA max.
• Resolution (pulses/rotation): 10, 20, 60, 100, 200, 300, 360, 500
• Output phases: Phase A
• Output configuration: NPN open-collector output
• Output capacity: Applied voltage: 30 VDC max.
  Sink current: 30 mA max.
  Residual voltage: 0.4 V max.
  (at sink current of 30 mA)
• Maximum response frequency *2: 30 kHz
• Phase difference between outputs: —
• Output duty factor: 50±25%
• Rise and fall times of output: 1.0 μs max. (Cable length: 500 mm,
  Control output voltage: 5 V, Load resistance: 1 kΩ)
• Starting torque: 1 mNm max.
• Moment of inertia: 1 × 10 kgm max.
• Shaft loading: 10 N
• Shaft loading: 10 N
• Maximum permissible speed: 5,000 r/min
• Ambient temperature range: Operating: -10 to 55°C (with no icing), Storage: -25 to 80°C (with no icing)
• Ambient humidity range: Operating/storage: 35% to 85% (with no condensation)
• Insulation resistance: 20 MΩ min. (at 500 VDC) between current-carrying parts and case
• Dielectric strength: 500 VAC, 50/60 Hz for 1 min between current-carrying parts and case
• Vibration resistance: Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
• Shock resistance: Destruction: 500 m/s 3 times each in X, Y, and Z directions
• Degree of protection *3: IEC 60529 IP50
• Connection method: Pre-wired Models (Standard cable length: 500 mm)
• Material: Case: Aluminum alloy, Main unit: Aluminum, Shaft: SUS420J2, Mounting Bracket: Galvanized iron
• Weight (packed state): Approx. 35 g
• Accessories: Coupling, Servo Mounting Bracket (provided with the E6A2-CWZ[]), Hexagonal wrench, Instruction manual