E2EQ-X20D230-M1TGJ-T 0.3M Cảm biến tiệm cận Omron, Size M30, 20 mm, 2-wire, NC

Thông số kỹ thuật cảm biến tiệm cận Omron E2EQ-X20D230-M1TGJ-T 0.3M

• Sensing distance: 20 mm ±10%
• Setting distance: 0 to 16 mm
• Differential travel: 15% max. of sensing distance
• Detectable object: Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on Catalog.)
• Standard sensing object (Iron): 60 × 60 × 1 mm
• Response frequency *1: 200 Hz
• Power supply voltage: 10 to 30 VDC, (including 10% ripple (p-p))
• Current consumption: 0.8 mA max.
• Output configuration: -
• Operation mode (with sensing object approaching): D1 Models: NO D2 Models: NC Refer to the timing charts under I/O Circuit Diagrams/Timing charts on Catalog for details.
• Control output: 3 to 100 mA
• Control output Residual voltage: Polarity: 3 V max. (Load current: 100 mA, Cable length: 2 m) No polarity: 5 V max. (Load current: 100 mA, Cable length: 2 m)
• Indicator *2: D1 Models: Operation indicator (orange), Setting indicator (green) D2 Models: Operation indicator (orange)
• Protection circuits: Surge suppressor, Load short-circuit protection
• Ambient temperature range: Operating: -25 to 70°C, Storage: -40 to 85°C (with no icing or condensation)
• Ambient humidity range: Operating and Storage: 35% to 95% (with no condensation)
• Temperature influence: ±20% max. of sensing distance at 23°C in the temperature range of -25 to 70°C
• Voltage influence: ±1% max. of sensing distance at rated voltage in the rated voltage ±15% range
• Insulation resistance: 50 MΩ min. (at 500 VDC) between current-carrying parts and case
• Dielectric strength: 1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case
• Vibration resistance (destruction): 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
• Shock resistance (destruction): 1,000 m/s 10 times each in X, Y, and Z directions
• Degree of protection: Pre-wired/Pre-wired M12 Connector: IP67 (IEC 60529) and IP67G *3 (JIS C 0920 Annex 1)
• Connection method: Pre-wired (Standard cable length: 2 m) and Pre-wired M12 Connector (Standard cable length: 0.3 m)
• Weight *3 (packed state) Pre-wired: -
• Weight *3 (packed state) M12 Pre-wired Smartclick Connector: Approx. 210 g
• Weight *3 (packed state) Connector: Approx. 140 g
• Materials Case: Fluororesin coating (Base material: brass)
• Materials Sensing surface: Fluororesin
• Materials Clamping nuts: Fluororesin coating (Base material: brass)
• Materials Toothed washers: Zinc-plated iron
• Materials Cable: Vinyl chloride (PVC)
• Main IO-Link functions *2: -
• IO-Link Communication specifications *2: -
• IO-Link Baud rate: -
• IO-Link Data length: -
• IO-Link Minimum cycle time: -