E2E-X7T1 2M Cảm biến tiệm cận Omron AC/DC 2-Wire Shielded Normally open (NO)

Model: E2E-X7T1 2M

Liên hệ

E2E-X7T1 2M là cảm biến tiệm cận Thường mở. Thân ren M18, Shielded, sử dụng cable và điện áp AC/DC 2-Wire. Khoảng cách phát hiện 7 mm ±10%, độ nhạy phát hiện trong khoảng 0 to 5.6 mm.

Datasheet E2E-X7T1 2M

Thêm vào giỏ hàng

Thêm vào yêu thích

Tags:

Chi tiết sản phẩm

Thông số kỹ thuật cảm biến tiệm cận Omron E2E-X7T1 2M

Form of output switching element: Normally open (NO)
Size Ø: M18
Shielded: Shielded
AC/DC Wire: AC/DC 2-Wire
Sensing distance: 7 mm ±10%
Set distance *1: 0 to 5.6 mm
Differential travel: 10% max. of sensing distance
Detectable object: Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on Data Sheet.)
Standard sensing object: Iron, 18 × 18 × 1 mm
Response frequency *2: DC: 0.5 kHz AC: 25 Hz
Power supply voltage (operating voltage range): 24 to 240 VDC (20 to 264 VDC) 48 to 240 VAC (40 to 264 VAC)
Leakage current: DC: 1 mA max. AC: 2 mA max.
Control output Load current: 5 to 100 mA
Control output Residual voltage: DC: 6 V max. (Load current: 100 mA, Cable length: 2 m). AC: 10 V max. (Load current: 5 mA, Cable length: 2 m)
Indicators: Operation indicator (red), Setting indicator (green)
Operation mode (with sensing object approaching): NO (Refer to the timing charts under I/O Circuit Diagrams on Data Sheet for details.)
Protection circuits: Load short-circuit protection (20 to 40 VDC only), Surge suppressor
Ambient temperature: Operating: -25 to 70°C, Storage: -40 to 85°C (with no icing or condensation)
Ambient humidity range: Operating/Storage: 35% to 95% (with no condensation)
Temperature influence: ±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C
Voltage influence: ±1% max. of sensing distance at rated voltage in the rated voltage ±15% range
Insulation resistance: 50 MΩ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength: 4,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case
Vibration resistance: Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance: Destruction: 1,000 m/s2 10 times each in X, Y, and Z directions
Degree of protection: IEC 60529 IP67, in-house standards: oil-resistant
Connection method: Pre-wired Models (Standard cable length: 2 m)
Weight (packed state): Approx. 140 g
Materials Case: Nickel-plated brass
Materials Sensing surface: PBT
Materials Clamping nuts: Nickel-plated brass
Materials Toothed washer: Zinc-plated iron
Accessories: Instruction manual