E2E-X10MY15 2M Cảm biến tiệm cận Omron AC 2-Wire Unshielded Normally open (NO)

Model: E2E-X10MY15 2M

Liên hệ

E2E-X10MY15 2M là cảm biến tiệm cận Thường mở. Thân ren M18, Unshielded, sử dụng cable và điện áp AC 2-Wire. Khoảng cách phát hiện 10 mm ±10%, độ nhạy phát hiện trong khoảng 0 to 8 mm.

Datasheet E2E-X10MY15 2M

Thêm vào giỏ hàng

Thêm vào yêu thích

Tags:

Chi tiết sản phẩm

Thông số kỹ thuật cảm biến tiệm cận Omron E2E-X10MY15 2M

Form of output switching element: Normally open (NO)
Size Ø: M18
Shielded: Unshielded
AC/DC Wire: AC 2-Wire
Sensing distance: 10 mm ±10%
Set distance *1: 0 to 8 mm
Differential travel: 10% max. of sensing distance
Detectable object: Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on Data Sheet.)
Standard sensing object: Iron, 30 × 30 × 1 mm
Response frequency *2: 25 Hz
Power supply voltage (operating voltage range): 24 to 240 VAC (20 to 264 VAC), 50/60 Hz
Leakage current: 1.7 mA max.
Control output Load current: 5 to 300 mA
Control output Residual voltage: Refer to Engineering Data on Data Sheet.
Indicators: Operation indicator (red)
Operation mode (with sensing object approaching): Y1 Models: NO Y2 Models: NC Refer to the timing charts under I/O Circuit Diagrams on Data Sheet for details.
Protection circuits: Surge suppressor
Ambient temperature: Operating/Storage: -40 to 85°C (with no icing or condensation)
Ambient humidity range: Operating/storage: 35% to 95% (with no condensation)
Temperature influence: ±15% max. of sensing distance at 23°C in the temperature range of -40 to 85°C, ±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C
Voltage influence: ±1% max. of sensing distance at rated voltage in the rated voltage ±15% range
Insulation resistance: 50 MΩ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength: 4,000 VAC (M8 Models: 2,000 VAC), 50/60 Hz for 1 min between current-carrying parts and case
Vibration resistance: Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance: Destruction: 1,000 m/s2 10 times each in X, Y, and Z directions
Degree of protection: Pre-wired Models: IEC 60529 IP67, in-house standards: oil-resistant Connector Models: IEC 60529 IP67
Connection method: Pre-wired Models (Standard cable length: 2 m) and Connector Models
Weight (packed state): Approx. 130 g
Materials Case: Stainless steel (SUS303)
Materials Sensing surface: PBT
Materials Clamping nuts: Nickel-plated brass
Materials Toothed washer: Zinc-plated iron
Accessories: Instruction manual