E2B-M30KN20-WP-B1 cảm biến tiệm cận Omron E2B series, M30 , 20 mm, PNP, NO

Model: E2B-M30KN20-WP-B1

Liên hệ

E2B-M30KN20-WP-B1 là cảm biến tiệm cận dòng E2B Series, khoảng cách phát hiện 20 mm. Kiểu đầu ra PNP NO (Normally open).

Datasheet E2B-M30KN20-WP-B1

Thêm vào giỏ hàng

Thêm vào yêu thích

Tags:

Chi tiết sản phẩm

Thông số kỹ thuật cảm biến tiệm cận Omron E2B-M30KN20-WP-B1

Sensing distance: 20 mm ± 10%
Setting distance: 0 to 16 mm
Differential travel: 10% max. of sensing distance
Detectable object: Ferrous metal (The sensing distance decreases with non-ferrous metal.)
Standard sensing object (mild steel ST37): 60 × 60 × 1 mm
Response frequency *1: 100 Hz
Power supply voltage: 10 to 30 VDC. (including 10% ripple (p-p))
Current consumption: 10 mA max.
Output type: -B models: PNP open collector -C models: NPN open collector
Control output Load current: 200 mA max. (30 VDC max.)
Control output Residual voltage: 2 V max. (under load current of 200 mA with cable length of 2 m)
Indicator: Operation indicator (Yellow LED)
Operation mode (with sensing object approaching): -B1/-C1 models: NO -B2/-C2 models: NC
Protection circuit: Output reverse polarity protection, Power source circuit reverse polarity protection, Surge suppressor, Short-circuit protection
Ambient air temperature: Operation and storage: -25 to 70°C (with no icing or condensation)
Temperature influence: ±10% max. of sensing distance at 23°C within temperature range of -10 to 55°C ±15% max. of sensing distance at 23°C within temperature range of -25 to 70°C
Ambient humidity: Operation and Storage: 35 to 95%
Voltage influence: ±1% max. of sensing distance in 24 VDC ±15%
Insulation resistance: 50 MΩ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength: 1,000 VAC at 50/60 Hz for 1 min between current-carrying parts and case
Vibration resistance: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y and Z directions
Shock resistance: 1,000 m/s , 10 times each in X, Y and Z directions
Standard and listings: (1) IP67 (IEC60529) (2) EMC (EN60947-5-2)
Connecting method: Pre-wired models (standard is 4 mm dia. PVC cable with length = 2 m, 5 m). Connector models (M12-4pin)
Weight (packaged) Pre-wired model: Short body: Approx. 160 g, Long body: Approx. 210 g *2
Weight (packaged) Connector model: Short body: Approx. 140 g, Long body: Approx. 160 g
Material Case: Brass-nickel plated
Material Sensing surface: PBT
Material Cable: Standard cable is 4 mm dia. PVC.
Material Clamping nut: Brass-nickel plated
Material Toothed washer: Zinc-plated iron